A commercial coffee grinder should grind an 18 g double dose in about 3–6 seconds and keep that pace through a rush. That works out to roughly 3–6 g per second, against about 1–2 g per second for a typical home grinder. Flat burrs of 64 mm sit at the lower end of that range, and 75–83 mm burrs reach the top.
Duty cycle is how long the motor runs before it needs a rest. Home grinders are often rated for a few minutes of grinding followed by a cool-down, while commercial motors of about 350–1,000 W are built for continuous use. As a rough guide, 64 mm burrs suit a single-group machine, 70–80 mm burrs handle two groups, and very large burrs like the 120 mm set in the Compak R120 serve the busiest bars.
Heat is the real limit. As burrs warm up by 10–15 °C during back-to-back shots, the grind drifts finer and shots run slower, so the barista keeps adjusting. Fans, heat sinks and low-speed motors keep the burr chamber cool, and the Mazzer Kold S uses active cooling to hold the temperature steady through long shifts.
The peak hour matters more than the daily total. A café selling 300 cups spread across the day needs less grinder than one that serves 100 of them between 8 and 9 in the morning. Size the grinder for that rush and leave headroom, so the burrs stay cool on the busiest days.