What is the best Faber coffee machine overall?

Best Faber coffee machines in 2026 (1+ compared)

Faber coffee machines: which one should you buy?

Audited using multi-parameter algorithmic scoring, verified specs, and grades from independent expert reviews.

Overall Winner

The best Faber coffee machine overall is FABER SLOT PLAST ESE 44 MM, with an overall score of 5.31 points, a pump pressure of 15 bar, a water tank of 1.300 L, and a price of around £110.

The Faber Slot Plast is a semi-automatic espresso machine handcrafted in Italy and specifically optimized for eco-friendly E.S.E. 44mm coffee pods.

What defines the best Faber coffee machines?

Buying Criteria

In general, the best Faber coffee machines are Italian espresso machines for 44 mm paper pods. They hold the pod in a solid brass brew chamber and brew with a pump of about 15 bar. Each paper pod contains about 7 g of pre-ground coffee, so a shot needs no dosing, tamping or grinder. A used pod goes straight into the compost bin, with no plastic or aluminium capsule to recycle.

The top Faber models also have a sturdy metal body and a lever that closes the brew chamber, which seals the pod tightly for a dense crema. Large water tanks suit homes and small offices, and some versions can also be fed from a water bottle. A steam wand on selected machines froths milk for cappuccino. These machines are simple to use and need little cleaning beyond emptying the drip tray and descaling.

When should you consider buying a Faber coffee machine?

Key Factors

You should consider buying a Faber coffee machine if you want genuine Southern Italian bar-quality espresso brewed from ecological ESE 44 mm compostable paper pods. Manufactured in Italy, Faber machines utilize solid metal lever compression and heavy brass heat exchangers that deliver extraction consistency superior to mass-market plastic capsule brewers.

Faber machines are ideal for purists who value mechanical reliability, easy repairability, and zero plastic taste or landfill waste. However, if you require automated one-touch milk preparation, digital programmable displays, or compatibility with sealed plastic capsules, an automatic bean-to-cup machine or multi-drink pod unit will better match your lifestyle.

How much do Faber coffee machines cost?

Price Guide

Faber coffee machines cost about £110-£150, representing exceptional value for a machine built with heavy commercial-grade brass brewing components. The popular Slot Plast model sells for approximately £110, while stainless steel body editions like the Slot Inox or models with integrated steam wands reach £140-£150.

Ongoing operating expenses are among the lowest in the single-serve sector because universal ESE 44 mm paper pods cost roughly £0-£0 per serving and are sold by dozens of artisan Italian roasters. Routine descaling and periodic gasket lubrication keep the mechanical lever mechanism operating effortlessly for years.

What should you consider before buying a Faber coffee machine?

Key Factors

Before buying a Faber coffee machine, consider the following factors:

ESE 44 mm pod compatibility: Faber machines exclusively accept standard 44 mm easy serving espresso paper pods. They cannot use hard capsules or loose ground coffee without dedicated adapters.
Manual lever operation: Clamping the pod requires lowering a mechanical front lever with moderate hand pressure to form a hermetic seal against the brass thermal block before flipping the brew switch.
Water supply system: Faber machines feature a rear compartment that houses a standard 1.0–1.4 L glass or PET water bottle with silicone intake tubes, rather than a molded plastic reservoir, simplifying hygiene and refills.
Warm-up time and thermal stability: Thanks to the massive brass thermal block, the machine requires about two to three minutes to reach peak extraction temperature, after which it maintains exceptional thermal consistency across back-to-back shots.
Maintenance and gasket care: Paper pod residue is minimal, but the silicone group gasket should be wiped clean regularly and replaced every 12 to 18 months to prevent pressure leaks during extraction.